All mirrors shown below are universal,
however the brackets used to attach the mirrors are car specific. The mirrors
attach to the brackets first and then the brackets attach to your door with
the supplied hardware. Drilling of new holes into your door are required for
the installation of our mirrors.
** IMPORTANT**
OUR BRACKETS MAY BE LARGER THAN THE OEM BRACKET THEREFORE IT MAY OVERLAP A LITTLE OVER THE DOOR GLASS.
SOME OF THE FACTORY HOLES MAY LINE UP WITH OUR BRACKET, HOWEVER NEW HOLES MAY HAVE TO BE DRILLED INTO THE DOOR TO ATTACH OUR BRACKET.
THE CORNER OF THE BRACKET IS THE STARTING POINT FOR PROPER PLACEMENT OF THE BRACKET. ONCE THE CORNER IS LINED UP PROPERLY THEN THE POSITION OF THE NEW HOLES TO BE DRILLED CAN BE DETERMINED.
EACH BRACKET HAS 3 MOUNTING POINTS FOR THE SCREWS HOWEVER ONLY 2 OUT OF 3 MAY BE USED ON SOME APPLICATIONS.
SCREWS SUPPLIED WITH THE MIRRORS MAY BE SHORT FOR SOME APPLICATIONS IN WHICH CASE NEED TO GET LONGER SCREWS OF THE SAME DIAMETER.
ACURA INTEGRA K5 STYLE MIRRORS
Black Housing Manual or Power with LED.
Unique 2 color function of White Driving Lights & Amber Signal Lights.
Note: For the
use with any of our power mirrors for cars that do NOT come with factory
power mirrors. Cars that already have factory power mirrors do not need
this item since the factory PWS can be used with any of our power mirrors.
Our PWS will work only with our 3 wire power mirrors. Can also use our PWS
as a replacement for the factory PWS, however electrical knowledge and
splicing may be needed.
